1060 Aluminum Circle CC / DC Diameter Tolerance

Because the 1060 aluminium disc possesses good ductility, so there is a little tolerance after the annealing. You can see the differences in the form below.

Nominal Diameter	Tolerance
Multiple of 5mm	+/- 0.5mm
Not multiple of 5mm	+/- 3.0mm

Surface Protection: With PE/PVC coating on main side (if specified)

1060 aluminium round discs possess high aluminum content. It is the most widely applied alloy on the market and relatively cheaper. 1060 aluminium round disc is of high flexibility, corrosion-resistant, good conductivity to electricity and heat.
 

1060 Aluminum Circle CC / DC Temper designation (For Reference)

Temper	Definition
O	Annealed
H12	Strain Hardened, 1/4 Hard
H14	Strain Hardened, 1/2 Hard
H16	Strain Hardened, 3/4 Hard
H18	Strain Hardened, Full Hard
H22	Strain Hardened and Partially Annealed, 1/4 Hard
H24	Strain Hardened and Partially Annealed, 1/2 Hard
H26	Strain Hardened and Partially Annealed, 3/4 Hard
H28	Strain Hardened and Partially Annealed, Full Hard

 

1060 Aluminum Circle CC / DC Alloy designation (For Reference)

XieNuo Aluminum Company can provide our customers with certified quality aluminium oxide discs. Our aluminum polishing discs can produced according to both chinese standard and american standard.

Alloy Series	Chinese Standard	American Standard	European Standard
1xxx Series	1060	1060	-

 

1060 Aluminum Circle CC / DC Chemical Compositing

1060 aluminum disc or anodized aluminum discs are almost pure aluminum. There are little other elements in the aluminium circles. So they have their unique pros and cons during the applications.

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others:Each	Others:Total	Al:Min.
1060	0.25	0.35	0.05	0.03	0.03	-	0.05	0.03	0.03	-	99.6

1060 aluminium disc and aluminium oxide disc are among the most common aluminum products on the market. We can make kitchenware, lamp parts and aluminum snow disc out of the aluminum discs for sale. Or other conductive machine components. The products can be put together by contact welding or gas welding. XieNuo aluminium disc price is always the direct factory cost.
 

1060 Aluminum Circle CC / DC Application

The common usage of 1060 aluminum circle discs are processing into cookwares, lampshades and sign boards. The elongation of aluminium disc is usually between 35%-38%.

Type	Application
Common Cookware	Pan Lid, Non-Stick Pans/Pots, Pressure Cookers, Kettle, Induction Cooker Cladding, etc.
Lamps and Lantern Parts	Lamp shade, Lamp Cup, etc.
Construction Material	Traffic Guideboard, Building Decorations, etc.
Other	Transportation, Electronic Appliance, Consumer Goods, etc.

 

Packing details:

★Package: Wooden pallet with paperboard covered and stainless steel band strapping, the whole outside is wrapped with thermoplastic film. Or carton packaging.

★Wooden pallet size: usually 100*100cm (standard package)

★Or according to customer's requirements

Transportation

★Port of dispatch: Tianjin port; Qingdao port

★Delivery time: According to customer's demand or two sides negotiate

★Timely response: Timely response to your inquiry within 24 hours and provide solution.  

★Competitive Price: Make the products competitive in your market.  

★Free sample: Free sample are offered, trial order are accepted for quality evaluation.  

★Strict quality control: We set Quality Management System, from the raw material to finished products, produce high quality products according to chemical & physical specifications strictly to satisfy customers' needs.

★Fast delivery time: Within 3-30 days according to your quantity after receiving your advance payment. 

★ Professional services: The main managers in different divisions of the company all have the senior or middle titles, they will provide you the corresponding professional services.

We are here for you!